There is USB drive recovery software that are available for these issues. We offer our services to do this for you; and in various ways, if you’re otherwise unable to do this on your own.

A USB flash drives stores its data within the memory much like a hard disk. The operating-system can, afterwards, fetch this data when needed to become utilized. There might be various problems that risk turning your USB drive data inaccessible. For example when the drive is unmounted incorrectly in the port then it can result in data corruption. One more reason for that stores’ data corruption could be invalid data within the Master Boot Record (MBR) or Partition Boot Record (PBR) or directory structure around the USB drive.

There might be many other reasons that could turn your USB no longer working. This might happen either because of physical corruption or logical corruption. The most popular hardware/physical issues are damaged stems and connectors, dead drives (no power), damaged circuit or NAND gate, not recognised, RAW, have to format, not accessible, and Dead Drives, etc.

Wish to recover data from inaccessible/corrupt USB drive?

To recuperate data from your inaccessible USB or Memory stick, first, you’ve got to be in a position to find out the exact reason resulting in the issue while studying the USB drive.

Recovering files from Physical Issues:

For those who have an actual error like a damaged connector, circuit board, NAND memory nick from the drive, then your hardware must be replaced to correct. Doing-it-yourself can result in a whole lot worse situations. Better you receive the aid of professionals in this region. You are able to hire any reliable file recovery company like PC Master Pro who’re specialized in recovering data from physically broken USB drive.

Damaged Stems and Connectors, & Dead Drives (no capacity to the USB):

A typical symbol of the physical errors is a few types of error messages or troubles that you simply after connecting the USB. Common error messages are “Please Insert Disk into Removable Disk” or “USB Device Not Recognized or Malfunctioned“, “you have to format the disk before using it”, RAW partition, dead or unresponsive drives, and broken controller chips and/or circuit boards.

When the silver USB connector is damaged or even the circuit board is broken it results in power cut-off and away to the USB. Such situation, soldering and circuit repair are needed. It isn’t advised to get it done yourself as though anything goes completely wrong, you might permanently lose use of your USB. It’ll prevent having your data effectively retrieved or sometimes impossible. To cope with above physical errors, specialised equipment and expertise are needed. So better you give it with a professional and allow them to cope with the chaos.

The mistake: “Please Insert Disk into Removable Disk”:

This error takes place when the memory stick controller software becomes corrupt. It may also happen should there be some difficulties with the NAND memory. The above mentioned error can result from poor quality or generic NAND memory chips. Having a frequent quantity of reads and writes, the condition from the drive turns worse.

The mistake signifies that there’s some problem with the NAND memory chips. Most most likely the metadata kept in the NAND memory is corrupted or easily wiped also it can’t be mounted then, thus turning the drive unreadable. If you attempt to browse the drive, you’re going to get the mistake message “Please insert a disk into Removable Disk”. Also, by trying to determine the drive size, it always shows its capacity as 0MB. Because the device can’t be installed on home windows so, should you check Device Manager under Hard drives, another reputation for the USB drive is going to be listed. Also, the Disk Management shows a drive letter without any Media.

Such situation, you have to look for manufacturers that perform USB file recovery or memory stick file recovery.

Recovering files from Logical Issues:

Should there be some logical/software errors using the USB drive, it is simple to repair it. You have to repair the file structure so the USB memory stick may be used again.

This is how you can scan the problems using Windows:

  • Insert the USB drive into the USB port of your system
  • Go to My Computer>Removable Disk Icon.
  • Right click the Removable Disk Icon  and open its Properties
  • Click on the Tools tab.
  • Click Check Now button.
  • You will be given two check disk options “Automatically fix file system errors” and “Scan for and attempt recovery of bad sectors”.
  • Check both check boxes.
  • Click Start. This will initiate the scanning process.
  • Click Close after the scan process is completed.

If you are using Windows 7 then carry out the following steps to repair the USB Flash Drive:

  • Insert the USB drive into the USB port of your system
  • Go to My Computer>Removable Disk Icon.
  • Right click the Removable Disk Icon  and open its Properties
  • Click on the Tools tab.
  • Click  “Rebuild” button
  • Let the scan process get completed. Close the scan window once it’s completed.
  • Right-click the icon of the USB flash drive and “Eject”. Then remove the drive from the USB port.

Hopefully, this would help you solve your problem.